Gas Heated
Liquid Propane Gas (LPG)
GAS HEATED AGITATING HOT AIR MELTERS
The insulated double jacketed hot melt machines require a site 110v power supply (within 20 metres) to run the motor that drives the gearbox and agitating paddles plus two (2) number full 47kg Liquefied Propane Gas cylinders. The hot melt cookers work by producing heat from an open nozzle propane burner firing down a series of stainless steel perforated tubes, allowing hot air and radiated heat into the heat exchange chamber to provide faster melting times. All machines are thermostatically controlled and are fitted with paddle agitators.
OPTIONS
Available as either a 1.5 drum or 3 drum model all machines are supplied serviced, PAT tested and certified in accordance with the requirements of the Lifting Operations and Lifting Equipment Regulations 1998 (LOLER).
The drums should be emptied at the end of the day so as to prevent Hot Melt materials setting in the drum overnight as this can cause chargeable damage to the agitators and/or electric motor on start-up the next day.
HIRE INFORMATION
Hire machines must be returned empty of any Hot Melt material to prevent Hot Melt materials setting in the drum and cause chargeable damage to the agitators and/or electric motor.
All hire machines are on a first come first serve basis, and subject to confirmed availability.
| 1.5 Drum Model | |
|---|---|
| Drive | Electric |
| Chassis | Caster Mounted |
| Overall Length | 2420 mm |
| Width | 880 mm |
| Working Height | 835 mm |
| Overall Height | 1250 mm |
| Tare Weight (unladen) | 780 kg |
| SWL | 1100 kg |
| Proof Load | 780 kg |
| No. Burner Heads | 1 |
| Burner Head Diameter | 50 mm |
| O2 emissions | 3.3 % |
| CO2 emissions | 11.6 % |
| CO PPM | 40 |
| CO/CO2 | 0.003 |
| 3 Drum Model | |
|---|---|
| Drive | Electric |
| Chassis | Caster Mounted |
| Overall Length | 2540 mm |
| Width | 1270 mm |
| Working Height | 1025 mm |
| Overall Height | 1570 mm |
| Tare Weight (unladen) | 1021 kg |
| SWL | 1600 kg |
| Proof Load | 2000 (25% overload) kg |
| No. Burner Heads | 2 |
| Burner Head Diameter | 50 mm |
| O2 emissions | 0.5 % |
| CO2 emissions | 13.4 % |
| CO PPM | 670 |
| CO/CO2 | 0.005 |